Lampu Lalu Lintas LED Daya Tinggi PCB lan Toko Komponen Elektronik
Detail Produk
Bahan Dasar: FR-4, FR2.Taconic, Rogers
Tembaga Kekandelan: 1/2 oz min;12 oz maks
Ketebalan Papan: 0.2mm-6.00mm(8mil-126mil)
Min.Ukuran Lubang: 0.1mm (4mil)
Min.Jembar Garis: 0.075mm (3mil)
Min.Jarak Line: 0.1mm4mil)
Finishing lumahing: Immersion Gold/Au, HASL, OSP, etc.
Warp & Twist: 0,7%
Posisi bolongan: +/- 0,075mm (3mil) CNC Drilling
Resistance Isolasi: 10Kohm-20Mohm
Konduktivitas: <50 ohm
Tes Tegangan: 10-300V
Kontrol ANCE: +/-10%
Beda Impenitence: +-/10%
Toleransi Outline: +/-0.125mm(5mil) CNC Routing +/-0.15mm(6mil) dening Punching
Diameter Lubang (H) PTH L: +/-0,075mm(3mil) NON-PTH L: +/-0,05mm(2mil)
Jembar konduktor (W): +/-20% saka karya seni asli PTH L: +/-0.
Layanan Kita
Kita bisa nyedhiyani layanan siji-mandeg:
1. Papan sirkuit PCB.
2. E-test.
3. mundhut komponen elektronik.
4. Déwan PCB: kasedhiya ing SMT, BGA, DIP.
5. Tes fungsi PCBA.
6. Rakitan kurungan.
Kapasitas produk PCB
| Kapasitas Produksi PCB | |
| Item | Spesifikasi |
| Bahan | FR-4, FR1, FR2;CEM-1, CEM-3, Rogers, Teflon, Arlon, Base Aluminium, Base Tembaga, Keramik, Piring, etc. |
| pangandikan | Tg CCL dhuwur kasedhiya (Tg>=170 ℃) |
| Rampung Papan Kekandelan | 0,2 mm-6,00 mm (8mil-126mil) |
| Lumahing Rampung | Jari emas(>=0.13um), Emas Immersion(0.025-0075um), Emas Plating(0.025-3.0um), HASL(5-20um), OSP(0.2-0.5um) |
| wangun | Routing, Punch, V-cut, Chamfer |
| Perawatan lumahing | Topeng Solder (ireng, ijo, putih, abang, biru, ketebalan> = 12um, Blok, BGA) |
| Silkscreen (ireng, kuning, putih) | |
| Topeng bisa kulit (abang, biru, ketebalan>=300um) | |
| Inti minimal | 0,075 mm (3 mil) |
| Ketebalan tembaga | 1/2 ons min;12 oz maks |
| Jembar Jejak Min & Jarak Garis | 0,075mm/0,075mm(3mil/3mil) |
| Min Diameter Lubuk kanggo Pengeboran CNC | 0,1 mm (4 mil) |
| Min Diameter Lubang kanggo Punching | 0.6mm (35mil) |
| Ukuran panel paling gedhe | 610mm * 508mm |
| Posisi bolongan | +/- 0,075mm (3mil) Pengeboran CNC |
| Jembar konduktor (W) | +/- 0,05mm (2mil) utawa +/-20% asli |
| Diameter Lubang (H) | PTHL: +/- 0,075mm (3mil) |
| Non PTHL: +/- 0,05mm (2mil) | |
| Njelaske nganggo bentuk garis Toleransi | +/- 0.1mm (4mil) CNC nuntun |
| Warp & Twist | 0,70% |
| Ketahanan Isolasi | 10Kohm-20Mohm |
| Konduktivitas | <50ohm |
| Tes Tegangan | 10-300V |
| Ukuran Panel | 110 x 100 mm (min) |
| 660 x 600 mm (maks) | |
| Layer-layer misrepresentation | 4 lapisan: 0.15mm (6mil) maks |
| 6 lapisan: 0.25mm (10mil) maks | |
| Jarak minimal antarane pinggir bolongan kanggo pola sirkuit saka lapisan njero | 0,25 mm (10 mil) |
| Jarak minimal antarane outline papan kanggo pola sirkuit saka lapisan njero | 0,25 mm (10 mil) |
| Toleransi kekandelan Papan | 4 lapisan: +/-0.13mm (5mil) |
